Speedway Motors Univeral Steel Bucket Seat Mounting Frame Bracket Only

Install bucket seats in almost any car with a flat floor, Welded steel frame, black painted finish, 5 inches tall with 14.25 inch x 18 inch floor bolt pattern, Sliders and seat mounting plates available separately, Universal application may require some modification
Speedway Universal Bucket Seat Frame Mount Bracket
Sku # 91070025
Mfr. Part # 91070025
Condition
New
Brand
Speedway Motors
Sold
Each
Details
Notes
Upper mounting holes are 11″ center to center front to rear and 12″ center to center side to side
Floor mount holes are 14-1/4″ side to side and 18″ front to rear, both are center to center of holes in frame
Info
Seat mounting frame constructed of 1-inch OD tubular steel with .813-inch OD cross bars for strength
Frame can be easily cut and welded to modify in custom installations
Seat mounting frame has an installed height of 5 inches
Our universal bucket seat sliders bolt directly to this frame
Does NOT include fasteners to mount seat frame to vehicle
Seat frame mounting bolt hole pattern is 14-1/4-inches x 18-inches center-to-center
Perfect for ’40s and ’50s vehicles and most pickup trucks
Make Those Long Hauls Comfortable
There is nothing like getting out on the open road and taking a trip in your hot rod. Multi-state events where you are behind the wheel for several hours at a time mean your driving position must be one of comfort and control. Having the seat positioned just right, a tilt steering column, and proper pedal placement are all key to enjoying the ride and not arrive at your destination feeling like a pretzel.
Tilt steering columns are an easy upgrade, and we offer everything you would need to make that upgrade to your vehicle. Same goes for our huge selection of gas and brake pedal assemblies. So, when it comes to getting your aftermarket seats just right in your early hot rod or pickup truck, do not sweat it, we have you covered there too with our Universal Seat Mount.
Ready to Rack up the Miles
Our Universal Seat Mount is built from 1-inch OD round tube steel with .813-inch OD cross bars for strength and support. These universal bucket seat frame mount brackets are 5 inches tall and are designed for early hot rods and pickup trucks with a flat floor pan area, unlike later cars of the ’60s and ’70s that utilized welded-in-place automotive seat risers. If your vehicle’s floor is not completely flat the frame can be easily cut and modified/welded to fit your exact needs.
Designed to work with our universal bucket seat slider tracks and seat mounting plates, our Universal Seat Mount can easily be modified to work with most any seat slider design to mount aftermarket bucket seats in your early hot rod or pickup. Our seat mount simply requires a flat floor pan to mount and four holes to be drilled and you are in business.
Fit Just About Any Seat to Your Flat Floor Hot Rod
With a mounting bolt pattern of 14-1/4-inches x 18-inches center-to-center the Universal Seat Mount will fit most any floor. Order a pair of these and update your classic ’40s or ’50s bench seat ride to a pair of buckets, providing more support and comfort and room to add a center console!
Of course, if your ride’s floor is not totally flat a little cutting and welding will allow our Universal Seat Mount’s steel tube frame to conform to just about anything. Shorten the legs or lengthen the legs as needed to get just the right seat position you are looking for, but for most installations our seat mount will work as delivered with no modifications!
You will need your own seat mount attaching hardware to mount the Universal Seat Mount frame to your floor. If you are looking for universal seat brackets and sliders to mount your aftermarket bucket seats we have what you need, so get your butt into some buckets and enjoy that long road trip today!
Charts
(PDF)
WARNING: Cancer and Reproductive Harm — p65Warnings.ca.gov
Specs
Material Type
Steel
Sold in Quantity
Each
Finish
Painted
Notes
14.25″ x 18.00″ bolt hole pattern for the floor.
Centerline of Holes
14.25
Overall Height
5.00
Centerline of Holes (Alternate)
18.00
Tube O.D.
1
MFG. Part #
91070025
Reviews
yes
Rated
by Sven on June 24, 2021
Summary:
Worked out great.
just what I was looking for building my drag truck
Rated
by Bob on June 01, 2021
Summary:
64 Ford F100 Drag truck, risers put seat back at approximately the same height as stock seat
Yes, I recommend this product.
just what I was looking for building my drag truck
Rated
by Bob on May 27, 2021
Summary:
1964 Ford F100 SWB gasser building to race with Southeast Gassers
Yes, I recommend this product.
BRACKET LOOKS GOOD
Rated
by CHUCK on May 18, 2021
Summary:
I THINK THEY WILL BE JUST FINE
Pros:
WILL HAVE TO MODIFY TO FIT MY BUCKET SEATS
Yes, I recommend this product.
I would buy it again
Rated
by Dennie on May 06, 2021
Summary:
To mount seat
Yes, I recommend this product.
Related Items / Suggested Parts
Universal Seat Mounting Frame, Slider and Mounts
Speedway Universal Bucket Seat Slider Tracks
Universal Seat Mount Plates
Shipping
Combined Shipping:
Please take advantage of the “add to cart” button on each listing to get everything in your cart prior to completing checkout. This will ensure you receive a combined shipping rate on your entire order.
Freight Shipping:
Some products are too large for standard ground delivery and must be shipped via truck freight.
Please contact us via eBay Message for a freight shipping estimate.
When possible, please provide a business or commercial address for delivery to eliminate additional fees.
Please ensure the phone number provided is accurate to avoid delays.
Upon delivery, the recipient must inspect the shipment before the driver leaves as there may be concealed damage; please open the carton to inspect the contents. Any visual damage must be noted on the shipping document BEFORE signing for delivery. Any damage not noted before signing for delivery is the buyer’s responsibility. If damage is found, the shipment may be refused, but please contact us as soon as possible and arrangements will be made to have the product replaced and damaged parts returned.
Tech Support
We’re here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help.
About
Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 69 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.
Return Policy
We want you to be satisfied with your purchase. If within 60 days after you receive your shipment and you are not satisfied, you may return the item for a refund. Refunds will be processed (1-2) days after the item is received by Speedway. All returned merchandise must be in original factory condition with no modifications or alterations. A restocking fee up to 15% may be applied if items are not in new condition.
Returned merchandise must include all packaging materials, warranty cards, manuals, and accessories. If the items being returned need to be repackaged, there will be a repacking charge. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. You must ship orders back PREPAID. WE DO NOT ACCEPT COD SHIPMENTS.
All fiberglass items returned will be subject to a 15% restocking charge. No returns on electrical parts, DVDs, and books unless they are defective. Absolutely no returns on special order or closeout merchandise.
Payment
Accepted Payment Methods – PayPal and major credit cards are accepted.
Terms – Immediate payment is required on all listings.
To view states in which sales tax will apply to your order, please visit the “shipping and payments” tab.
Guarantee
Speedway accepts full responsibility for the accuracy of our listings and product representation. If an egregious shipping or description error occurs, we are happy to assist with a replacement or refund.
Disclaimer
Due to our large inventory and the diversity of our product line, the stock photo used may not be an exact representation of the item you are bidding on. Please read all product information carefully before purchase to avoid any order issues.